LEGACY PRODUCTS

At ENTTEC, we are always trying to push the boundaries of technology and offer quality, robust and good-value products that lighting designers and installers can use to create the very latest effects as demanded by their clientele.

As new models enter our range, certain older products will inevitably reach the end of their life-cycle, which means there comes a time where we have to bid them farewell. Here you’ll find information and documentation relating to our end-of-life products. Please head to our Support section if you have any questions regarding these products.

RESOURCES

Retired products log: December 2019 > DOWNLOAD

At ENTTEC, we are always trying to push the boundaries of technology and offer quality, robust and good-value products that lighting designers and installers can use to create the very latest effects as demanded by their clientele.

As new models enter our range, certain older products will inevitably reach the end of their life-cycle, which means there comes a time where we have to bid them farewell. Here you'll find information and documentation relating to our end-of-life products. Please head to our Support section if you have any questions regarding these products.

RESOURCES

Retired products log: December 2019 > DOWNLOAD

ET3-D Indoor LED Bar

ET3-D Indoor LED Bar

An indoor light bar for club, concert or architectural applications. The combination of RGB, amber and whites produce a mixture of deep colour or bright beautiful pastels.

From $499.00

ET3-R Outdoor LED Bar

ET3-R Outdoor LED Bar

All-weather and all-rounder Outdoor LED Bar. IP65 rated and built for life on the road, this light Bar is perfect for exterior use and any kind of applications.

From $598.50

ET3-X Indoor LED Bar

ET3-X Indoor LED Bar

With sheer engineering brilliance, the ET3-X produces a rich colour palette with unrivalled gamut and rendition.

From $499.00

Pixel Port: network rgb pixel driver legacy

Pixel Port: network rgb pixel driver legacy

Intelligent, all in one, touring Pixel LED Controller. COmpact and built to last, simply connect it to your pixel and your network. One driver can power up and drive up to 340 RGB pixels. This unit supports DMX over Ethernet and other output protocols. Perfect for touring, it comes with etherCON and powerCON connectors. The perfect portal for easy lighting control.

standalone

PowerCon jumper 2m

PowerCon jumper 2m

A high quality 2 meters long powerCON jumper cable.

PowerCon jumper 5m

PowerCon jumper 5m

A high quality 5 metres long powerCON jumper cable.

PowerCon jumper 950mm

PowerCon jumper 950mm

A high quality 950mm long powerCON jumper cable.

PSAT: pixel power supply legacy

PSAT: pixel power supply legacy

With our new Pixel power supply device, you can easily power up and inject data to pixel strip and dot, without the need of an external power supply. Connect your lights using a connector and a driver (such as the Pixelator). Perfectly suited for both the live event and installation markets.

Remote control cable E-Streamer Mk2

Remote control cable E-Streamer Mk2

Control your E-Streamer Mk2 with DMXPlayback Remote

9PDOT1 Clips (bag of 10)

9PDOT1 Clips (bag of 10)

Mounting Clips to suit 9PDOT1

9PDOT2 Clips (bag of 10)

9PDOT2 Clips (bag of 10)

Mounting Clips to suit 9PDOT2

9PDOT3 Clips (bag of 10)

9PDOT3 Clips (bag of 10)

Mounting Clips to suit 9PDOT3

9PDOT4 Clips (bag of 10)

9PDOT4 Clips (bag of 10)

Mounting Clips to suit 9PDOT4

9PDOT5 Clips (bag of 10)

9PDOT5 Clips (bag of 10)

Mounting Clips to suit 9PDOT5

9PDOT6 Clips (bag of 10)

9PDOT6 Clips (bag of 10)

Mounting Clips to suit 9PDOT6

9PDOT7 Clips (bag of 10)

9PDOT7 Clips (bag of 10)

Mounting Clips to suit 9PDOT7

9PDOT8 Clips (bag of 10)

9PDOT8 Clips (bag of 10)

Mounting Clips to suit 9PDOT8

0.5m 5Pin DMX Cable

0.5m 5Pin DMX Cable

This short DMX jumper cable is perfect for connecting your DMX fixtures to controllers.

2M 5Pin DMX Cable M-F

2M 5Pin DMX Cable M-F

This DMX cable is perfect for connecting your dmx fixtures to ENTTEC and other DMX devices.

5M 5Pin DMX Cable M-F

5M 5Pin DMX Cable M-F

This DMX cable is perfect for connecting your ENTTEC DMX device to any DMX fixture.

$31.50

PHERO 30 RGB pixel bar

PHERO 30 RGB pixel bar

The Phero 30 allows unparalleled flexibility and amazing light output. Ideal for pixel mapping and universal lighting applications.

PHERO 33 RGB pixel bar

PHERO 33 RGB pixel bar

Phero 33 is for direct lighting applications. Its slim form factor makes it an ideal touring partner, with 3 diffuser options to choose from.

PHERO 30 WHITE bar

PHERO 30 WHITE bar

The classic Phero 30 design with amazing white light output instead of RGB. Designed for pixel mapping and universal lighting applications.

DIN-RS232

DIN-RS232

The DIN-RS232 is an RS232 to DIN-NET interface device. It can send RS232 strings when a particular DIN-NET action is …

DIN-RELAY 4

DIN-RELAY 4

DIN-INPUT 8

DIN-INPUT 8

The DIN-INPUT 8 is an 8 dry contact input to a din-net device. It can detect a close or open …

9PDOT1 (string of 50)

9PDOT1 (string of 50)

High resolution IP67 35mm clear RGB 24V pixel dots with 125mm pitch.

9PDOT2 (string of 50)

9PDOT2 (string of 50)

High resolution IP67 40mm clear RGB 24V pixel dots with 125mm pitch.

9PDOT3 (string of 50)

9PDOT3 (string of 50)

High resolution IP67 44mm opal dome RGB 24V pixel dots with 125mm pitch.

9PDOT4 (string of 50)

9PDOT4 (string of 50)

High resolution IP67 42mm square RGB 24V pixel dots with 125mm pitch.

9PDOT5 (string of 50)

9PDOT5 (string of 50)

High resolution IP67 25mm clear RGB 12V pixel dots with 100mm pitch.

9PDOT6 (string of 50)

9PDOT6 (string of 50)

High resolution IP67 16mm clear square RGB 5V pixel dots with 100mm pitch.

9PDOT7 (string of 50)

9PDOT7 (string of 50)

High resolution IP67 16mm clear square white RGB 5V pixel dots with 100mm pitch.

9PDOT8 (string of 50)

9PDOT8 (string of 50)

High resolution IP67 16mm opal dome square white RGB 5V pixel dots with 100mm pitch.

Black 9PDOT Cable (female)

Black 9PDOT Cable (female)

Loose connector cable to suit black 9PDOTs (female connector)

Black 9PDOT Cable (male)

Black 9PDOT Cable (male)

Loose connector cable to suit white 9PDOTs (Male connector)

White 9PDOT Cable (female)

White 9PDOT Cable (female)

Loose connector cable to suit white 9PDOTs (female connector)

White 9PDOT Cable (male)

White 9PDOT Cable (male)

Loose connector cable to suit white 9PDOTs (Male connector)

PRO2 Wall Mount Kit

PRO2 Wall Mount Kit

Pro2 Wall Mount plate This accesory allows mounting of the USB Pro2 interface onto a permanent surface. Ideal …

5W USB Power Supply

5W USB Power Supply

16cm 5Pin DMX Cable M-F

16cm 5Pin DMX Cable M-F

This short DMX jumper cable is perfect for connecting your DMX fixtures to other DMX controller.

10M 5Pin DMX Cable M-F

10M 5Pin DMX Cable M-F

This DMX cable is perfect for connecting your ENTTEC DMX Device to any DMX fixture.

Heatsink for Pixel tile

Heatsink for Pixel tile

Protect your 144-LED pixel tile from overheating. Simply snap on, and you’re away!

8 way pixie driver rack

8 way pixie driver rack

Wing Rackmount Kit

Wing Rackmount Kit

The Wing rackmount bracket will allow you to rack your wings in a standard 19inch enclosure, punched with 2 extra holes

USB to RS232 Cable

USB to RS232 Cable

Connect DMXPlayback or DMXStreamer to your PC using USB.

DMX Wall plate Controller

DMX Wall plate Controller

Programmable multi-function DMX controller

DIN-LED4 350X

DIN-LED4 350X

The DIN-LED4 350X is a 4 channel constant current 350mA LED driver with DMX/RDM input.

DIN-LED4 700X

DIN-LED4 700X

The DIN-LED4 700X is a 4 channel constant current 700mA LED driver with DMX/RDM input. …

DIN-LED4 1000X

DIN-LED4 1000X

The DIN-LED4 100X is a 4 channel constant current 1000mA LED driver with DMX/RDM input.

Pixie Driver legacy

Pixie Driver legacy

Smart Pixel Tape Driver – drives upto 600 leds

DIN-NET USB

DIN-NET USB

It connects your existing DIN-NET to your computer via a USB cable, (supplied) and that allows the free DIN TOOL software …

DIN-POWER

DIN-POWER

The DIN-POWER is a power injector for the DIN-NET network. At least 1is needed for every din-net network. The din-power module …

Wireless DMX

Wireless DMX

Transmit and extend your existing DMX system without wires. One full DMX universe supported

E-Streamer Mk2

E-Streamer Mk2

Advanced show recorder with up 64 universes of playback and scheduling

E-Streamer Licenses

E-Streamer Licenses

Add multiple universes to your base E-Streamer unit

From $75.00

DMXPlayBack MK2

DMXPlayBack MK2

Simple playback unit  with the capability of storing up to 12 light shows created from static scenes

DMXPlayBack Remote MK2

DMXPlayBack Remote MK2

Add on to DMX Playback or DMX Streamer. DMX Playback Remote can start/stop up to 12 preset shows.

ENTTEC Program Wing

ENTTEC Program Wing

Designed for fast editing and creation of cues, palettes, groups etc. Includes 3 rotary encoders and large text display with dedicated numeric and program buttons.

ENTTEC Playback Wing

ENTTEC Playback Wing

Designed to allow fast manual control of  lighting control software

ENTTEC Shortcut Wing

ENTTEC Shortcut Wing

Shortcut Wing, ideal as a lighting control add on. Multiple user defined keys can be set to trigger as a shortcut of supported lighting software.

ENTTEC MIDIwing

ENTTEC MIDIwing

Conversion software designed to enable Enttec Playback, Shortcut or Program Wings to converse via MIDI or ASCII.

Bitnami