Pixie Driver




Easy control of Pixel Strip

Pixel strip is the same as common RGB Led strip but each pixel (dot) is individually controllable. Allowing amazing visual effects to be created. The new generation of pixel strips is now available with more density and lower cost. Controlling them has remained a problem. The Pixie driver solves that problem with an ALL in one approach with power supply & driver in one. Connect pixel strip, DMX and power and you can create amazing effects.

High density


Available in 2 versions, the 110Watts pixie driver can control up to 600 RGB LEDs from one source (USB) , the 55 Watts 300 RGB LEDs. This means you need less hardware to controls more strips. Using a standard 30 LEDs per meter strip, that's 20 meters of LED strip from one compact device

Compatible with ENTTEC Pixel Tape and Dots, including 9PDOT


The most popular LED chips (WS2812) have an in-built driver, making them more suitable in more cases and allowing tighter pitch up to 7.5mm. The Pixie driver can drive up to 300 pixels from its DMX ports, and more from USB.
Click Here for 8PL Pixel options

The new IP67 rated 9PDOT range of Pixel dots, allow higher resolution and brilliant brightness in a small form factor. Supported by the Pixie driver from firmware 1.14 onwards.
Click Here for IP67 Pixel Dots range

Live or Standalone

With inbuilt memory the Pixie driver can either replay a pre programmed sequence or work in live mode.
Supported Modes How it works
Standalone mode record via USB using Pro Manager software (Art-Net input)
Only one sequence can be stored at any single time - and runs on powerup.
Please read FAQ for more details on Standalone mode
Live Mode drive the Pixels using DMX input from its 2x DMX ports.
Personality decides how the 2 DMX inputs are mapped.

Smallest in its class

With an overall size of 215mm x 129mm x 42.7mm, the Pixie driver is the smallest all in one device in its class. A rack mount frame allows mounting of 8 units in a 3RU high enclosure offering un-paralleled density of Pixel strip driving.
Copyright © 2016 ENTTEC, all rights reserved. Rowville, Melbourne, Australia