Wireless DMX




Wireless DMX made easy

DINTEC Wireless DMX system allows transmission of one DMX universe over wireless. It supports one full DMX universe of up to 512 channels at maximum refresh rate. Fully comaptible with existing CRMX based wireless products.

Features

  • 2.4GHz wireless transmitter / receiver
  • Supports USITT DMX512, DMX512(1990) & DMX512-A
  • Supports 1 DMX Universe, upto 512 channels
  • 1-830Hz DMX frame rate
  • Frame synchronisation is less than 0.01ms
  • End-to-end DMX latency less than 5ms
  • Tested link range: up to 500 meters line-of-sight
  • based on CRMX (LumenRadio's wireless CRMX technology)
  • Automated cognitive coexistence
  • One touch Link to pair devices
  • Dynamic adaptive frequency hopping
  • Recovery time upon loss of radio link is less than 1s
  • Full DMX fidelity and frame integrity
  • Error correction and packet recovery
  • DIN RAIL mountable
  • Please note: RDM is not supported
Downloads/Links
Gallery
Copyright © 2016 ENTTEC, all rights reserved. Rowville, Melbourne, Australia