Products

Ethernet

DIN-ODE POE Mk2

DIN-Rail DMX-Artnet node in PoE form providing 1 universe of bi-directional DMX to Ethernet conversion

$320.00

DIN-ODE Mk2

DIN RAIL DMX-Artnet node that provides 1 universe of bi-directional DMX to Ethernet conversion, perfect for distributing DMX signals over a network.

$275.00

LEGACY PRODUCTS

ET3-D Indoor LED Bar

An indoor light bar for club, concert or architectural applications. The combination of RGB, amber and whites produce a mixture of deep colour or bright beautiful pastels.

From $499.00

ET3-R Outdoor LED Bar

All-weather and all-rounder Outdoor LED Bar. IP65 rated and built for life on the road, this light Bar is perfect for exterior use and any kind of applications.

From $598.50

ET3-X Indoor LED Bar

With sheer engineering brilliance, the ET3-X produces a rich colour palette with unrivalled gamut and rendition.

From $499.00

Pixel Port: network rgb pixel driver legacy

Intelligent, all in one, touring Pixel LED Controller. COmpact and built to last, simply connect it to your pixel and your network. One driver can power up and drive up to 340 RGB pixels. This unit supports DMX over Ethernet and other output protocols. Perfect for touring, it comes with etherCON and powerCON connectors. The perfect portal for easy lighting control.

PowerCon jumper 2m

A high quality 2 meters long powerCON jumper cable.

PowerCon jumper 5m

A high quality 5 metres long powerCON jumper cable.

PowerCon jumper 950mm

A high quality 950mm long powerCON jumper cable.

PSAT: pixel power supply legacy

With our new Pixel power supply device, you can easily power up and inject data to pixel strip and dot, without the need of an external power supply. Connect your lights using a connector and a driver (such as the Pixelator). Perfectly suited for both the live event and installation markets.

Remote control cable E-Streamer Mk2

Control your E-Streamer Mk2 with DMXPlayback Remote

9PDOT1 Clips (bag of 10)

Mounting Clips to suit 9PDOT1

9PDOT2 Clips (bag of 10)

Mounting Clips to suit 9PDOT2

9PDOT3 Clips (bag of 10)

Mounting Clips to suit 9PDOT3

9PDOT4 Clips (bag of 10)

Mounting Clips to suit 9PDOT4

9PDOT5 Clips (bag of 10)

Mounting Clips to suit 9PDOT5

9PDOT6 Clips (bag of 10)

Mounting Clips to suit 9PDOT6

9PDOT7 Clips (bag of 10)

Mounting Clips to suit 9PDOT7

9PDOT8 Clips (bag of 10)

Mounting Clips to suit 9PDOT8

0.5m 5Pin DMX Cable

This short DMX jumper cable is perfect for connecting your DMX fixtures to controllers.

2M 5Pin DMX Cable M-F

This DMX cable is perfect for connecting your dmx fixtures to ENTTEC and other DMX devices.

5M 5Pin DMX Cable M-F

This DMX cable is perfect for connecting your ENTTEC DMX device to any DMX fixture.

$31.50

PHERO 30 RGB pixel bar

The Phero 30 allows unparalleled flexibility and amazing light output. Ideal for pixel mapping and universal lighting applications.

PHERO 33 RGB pixel bar

Phero 33 is for direct lighting applications. Its slim form factor makes it an ideal touring partner, with 3 diffuser options to choose from.

PHERO 30 WHITE bar

The classic Phero 30 design with amazing white light output instead of RGB. Designed for pixel mapping and universal lighting applications.

DIN-RS232

The DIN-RS232 is an RS232 to DIN-NET interface device. It can send RS232 strings when a particular DIN-NET action is …

DIN-RELAY 4

DIN-INPUT 8

The DIN-INPUT 8 is an 8 dry contact input to a din-net device. It can detect a close or open …

9PDOT1 (string of 50)

High resolution IP67 35mm clear RGB 24V pixel dots with 125mm pitch.

9PDOT2 (string of 50)

High resolution IP67 40mm clear RGB 24V pixel dots with 125mm pitch.

9PDOT3 (string of 50)

High resolution IP67 44mm opal dome RGB 24V pixel dots with 125mm pitch.

9PDOT4 (string of 50)

High resolution IP67 42mm square RGB 24V pixel dots with 125mm pitch.

9PDOT5 (string of 50)

High resolution IP67 25mm clear RGB 12V pixel dots with 100mm pitch.

9PDOT6 (string of 50)

High resolution IP67 16mm clear square RGB 5V pixel dots with 100mm pitch.

9PDOT7 (string of 50)

High resolution IP67 16mm clear square white RGB 5V pixel dots with 100mm pitch.

9PDOT8 (string of 50)

High resolution IP67 16mm opal dome square white RGB 5V pixel dots with 100mm pitch.

Black 9PDOT Cable (female)

Loose connector cable to suit black 9PDOTs (female connector)

Black 9PDOT Cable (male)

Loose connector cable to suit white 9PDOTs (Male connector)

White 9PDOT Cable (female)

Loose connector cable to suit white 9PDOTs (female connector)

White 9PDOT Cable (male)

Loose connector cable to suit white 9PDOTs (Male connector)

PRO2 Wall Mount Kit

Pro2 Wall Mount plate This accesory allows mounting of the USB Pro2 interface onto a permanent surface. Ideal …

5W USB Power Supply

16cm 5Pin DMX Cable M-F

This short DMX jumper cable is perfect for connecting your DMX fixtures to other DMX controller.

10M 5Pin DMX Cable M-F

This DMX cable is perfect for connecting your ENTTEC DMX Device to any DMX fixture.

Heatsink for Pixel tile

Protect your 144-LED pixel tile from overheating. Simply snap on, and you’re away!

8 way pixie driver rack

Wing Rackmount Kit

The Wing rackmount bracket will allow you to rack your wings in a standard 19inch enclosure, punched with 2 extra holes

USB to RS232 Cable

Connect DMXPlayback or DMXStreamer to your PC using USB.

DMX Wall plate Controller

Programmable multi-function DMX controller

DIN-LED4 350X

The DIN-LED4 350X is a 4 channel constant current 350mA LED driver with DMX/RDM input.

DIN-LED4 700X

The DIN-LED4 700X is a 4 channel constant current 700mA LED driver with DMX/RDM input. …

DIN-LED4 1000X

The DIN-LED4 100X is a 4 channel constant current 1000mA LED driver with DMX/RDM input.

Pixie Driver legacy

Smart Pixel Tape Driver – drives upto 600 leds

DIN-NET USB

It connects your existing DIN-NET to your computer via a USB cable, (supplied) and that allows the free DIN TOOL software …

DIN-POWER

The DIN-POWER is a power injector for the DIN-NET network. At least 1is needed for every din-net network. The din-power module …

Wireless DMX

Transmit and extend your existing DMX system without wires. One full DMX universe supported

E-Streamer Mk2

Advanced show recorder with up 64 universes of playback and scheduling

E-Streamer Licenses

Add multiple universes to your base E-Streamer unit

From $75.00

DMXPlayBack MK2

Simple playback unit with the capability of storing up to 12 light shows created from static scenes

DMXPlayBack Remote MK2

Add on to DMX Playback or DMX Streamer. DMX Playback Remote can start/stop up to 12 preset shows.

ENTTEC Program Wing

Designed for fast editing and creation of cues, palettes, groups etc. Includes 3 rotary encoders and large text display with dedicated numeric and program buttons.

ENTTEC Playback Wing

Designed to allow fast manual control of lighting control software

ENTTEC Shortcut Wing

Shortcut Wing, ideal as a lighting control add on. Multiple user defined keys can be set to trigger as a shortcut of supported lighting software.

ENTTEC MIDIwing

Conversion software designed to enable Enttec Playback, Shortcut or Program Wings to converse via MIDI or ASCII.

Adaptors, Connectors

3 Pin Female to 5 Pin Male Connector

This adaptor can be used to convert the 5 pin DMX output of all our products into 3 Pin DMX.

$15.00

5 Pin male to 5 Pin male DMX connector

This adaptor can be used with the Datagate, Ethergate Mk2 or Open DMX USB when using the DMX port as input. In …

$15.00

3 PIN DMX Terminator

3 Pin DMX Terminator, useful to terminate DMX signal

$15.00

5 PIN DMX Terminator

5 Pin DMX Terminator, useful to terminate DMX signal.

$15.00

XLR 4PIN TO SCREW TERMINAL

Used to connect LED Strips to the Aleph CV Driver

$13.00

7.5 Volt Universal Power Supply

7.5 Volt power supply, complete with US, UK, EU and AU outlet adapters.

$25.00

Cables

Pixel BreakOut Cable

Our professional quality Pixel BreakOut Cable is the fastest and easiest way to connect your Pixel Port or PSAT to your pixel strips or dots.

$16.00

DMX 5 pin (Female) to RJ45 (Male) 1m cable

Useful conversion cable between male DMX 5 PIN outlets and female RJ45 outlets.

$20.00

PRO2 DB15- 3DMX+2MIDI Cable

MIDI + DMX Breakout cable for PRO MK2. Individually labelled ports MIDI-IN & MIDI-OUT 2x …

$35.00

PRO2 DMX breakout cable

DMX breakout cable for PRO MK2

$35.00

Mounting

8EP aluminium extrusion

For universal use. A high-output strip with a small footprint designed for surface applications.

$35.00

Universal bracket set

A high quality carbon steel mounting bracket set to suit many mounting options

$52.00

RDS4 Truss mount kit

Truss mount kit, specially engineered and crafted to fit RSD4.

$45.00

1RU 19inch Ear Kit

The heavy duty solution for mounting one of our 9.5 inch products.

$60.00

8 way CV driver rack

$525.00

8EA aluminium extrusion

For universal use. Designed for surface mount applications, with an opal diffuser.

$35.00

8EB aluminium extrusion

For mounting into grooves. Designed for recessed applications, with a lip for concealing plaster or timber edges.

$35.00

8EC aluminium extrusion

For building individual light fixtures. Designed for freestanding applications.

$35.00

8ED aluminium extrusion

For special applications. Designed for corner applications and situations where an angled beam is required.

$35.00

8EG aluminium extrusion

For mounting into grooves. Ultra-low profile strip designed for embedded applications.

$35.00

8ES aluminium extrusion

For maximum brightness. An extra-wide, high-output strip designed for surface applications.

$35.00

8EU aluminium extrusion

For high brightness. A powerful strip designed for surface applications.

$35.00

8EV aluminium extrusion

For universal use. A high-output strip with a small footprint designed for surface applications.

$35.00

8EW aluminium extrusion

For universal use. Our widest high-output strip designed for surface applications.

$35.00

8EX aluminium extrusion

For universal use. Our widest high-output strip designed for recessed applications.

$35.00

9EA aluminium extrusion

For use on staircases. A specialist extrusion for creating a spectacular effect.

$35.00

9EB aluminium extrusion

For illuminating walls. A specialist extrusion designed for wall wash effects.

$35.00

9EC aluminium extrusion

For universal use. A smart extrusion designed for surface applications.

$35.00

ODE Truss Mount Kit

ODE Truss mount kit to suit ODE

$35.00

2U 19 inch Rack mount Kit

The heavy duty solution for mounting any 2 of our 9.5 inch products

$75.00

Other

Gigabit Fibre Optic SFP module

Connect your Hyperion to fiber networks and transmit long distances at Gigabit speed with this awesome SFP module.

$48.00

RDM license key

Unlock ENTTEC’s full RDM software package, to be used in conjunction with our DMX interfaces

$390.00

PRO2 Zip Case

Carry your PRO 2 in style enough space to hold the PRO 2, breakout cable and the usb cable …

$30.00

Ethernet

Hyperion: EtherCON network switch

A touring-grade EtherCON network switch designed for life on the road, handling unicast, multicast and broadcast packets with an elegant and intuitive setup.

From $999.00

ODE MK2

Powerful Ethernet to DMX, single port solution that supports Art-Net, sACN or ESP and is RDM compatible

$275.00

ODE POE MK2

Solid-state single universe RDM compatible DMX node featuring PoE (802.3af)

$330.00

Datagate MK2

The ultimate advanced lighting data control tool, designed to configure, control and direct DMX distribution on advanced networked systems. Take control of your data like never before and enjoy perfect results every time.

$1,930.00

Storm 24

Need a high density Ethernet-DMX converter for your next pixel mapping project?

$1,560.00

Storm 8

8 Ports, Multi-protocol Ethernet to DMX converter

$599.00

Ethergate MK3

Dual Universe, Multi-protocol Ethernet to DMX Gateway

$550.00

NMU

NMU is a free Windows/Mac app, used to manage compatible ENTTEC DMX over Ethernet nodes.

DIN-ODE POE Mk2

DIN-Rail DMX-Artnet node in PoE form providing 1 universe of bi-directional DMX to Ethernet conversion

$320.00

DIN-ODE Mk2

DIN RAIL DMX-Artnet node that provides 1 universe of bi-directional DMX to Ethernet conversion, perfect for distributing DMX signals over a network.

$275.00

Plugs & Accessories

Gigabit Fibre Optic SFP module

Connect your Hyperion to fiber networks and transmit long distances at Gigabit speed with this awesome SFP module.

$48.00

Pixel BreakOut Cable

Our professional quality Pixel BreakOut Cable is the fastest and easiest way to connect your Pixel Port or PSAT to your pixel strips or dots.

$16.00

Universal bracket set

A high quality carbon steel mounting bracket set to suit many mounting options

$52.00

3 Pin Female to 5 Pin Male Connector

This adaptor can be used to convert the 5 pin DMX output of all our products into 3 Pin DMX.

$15.00

DMX 5 pin (Female) to RJ45 (Male) 1m cable

Useful conversion cable between male DMX 5 PIN outlets and female RJ45 outlets.

$20.00

5 Pin male to 5 Pin male DMX connector

This adaptor can be used with the Datagate, Ethergate Mk2 or Open DMX USB when using the DMX port as input. In …

$15.00

RDM license key

Unlock ENTTEC’s full RDM software package, to be used in conjunction with our DMX interfaces

$390.00

5 PIN DMX Terminator

5 Pin DMX Terminator, useful to terminate DMX signal.

$15.00

PRO2 DB15- 3DMX+2MIDI Cable

MIDI + DMX Breakout cable for PRO MK2. Individually labelled ports MIDI-IN & MIDI-OUT 2x …

$35.00

XLR 4PIN TO SCREW TERMINAL

Used to connect LED Strips to the Aleph CV Driver

$13.00

PRO2 Zip Case

Carry your PRO 2 in style enough space to hold the PRO 2, breakout cable and the usb cable …

$30.00

PRO2 DMX breakout cable

DMX breakout cable for PRO MK2

$35.00

7.5 Volt Universal Power Supply

7.5 Volt power supply, complete with US, UK, EU and AU outlet adapters.

$25.00

RDS4 Truss mount kit

Truss mount kit, specially engineered and crafted to fit RSD4.

$45.00

1RU 19inch Ear Kit

The heavy duty solution for mounting one of our 9.5 inch products.

$60.00

8 way CV driver rack

$525.00

ODE Truss Mount Kit

ODE Truss mount kit to suit ODE

$35.00

2U 19 inch Rack mount Kit

The heavy duty solution for mounting any 2 of our 9.5 inch products

$75.00

LED

IP66 CVC3 CC1-36

ENTTEC CVC3 is the waterproof LED strip driver that allows you to use our revolutionary Pixelator (or other) system for controlling non-pixel LED strip. This driver was designed using high-grade materials making very reliable to use in outdoor conditions.

$220.00

CV MK2 – LED Tape Driver

Constant Voltage LED Tape Driver & Power supply in one

$440.00

DIN-LED4PX

The DIN-LED4PX is a 4 channel constant voltage LED driver with …

$110.00

PushDIM 8A LED Dimmer (12-36V)

Single channel PWM push dim LED Dimmer.

Pixel Link system

The smart way to connect your pixels to ENTTEC controllers.

From $30.00

Pixel Control

IP66 Plink Injector PJ1-56

Compact Ethernet to Pixel Link driver – up to 2720 pixels

$220.00

Pixel Octo

DIN-RAIL LED pixel controller

The Pixel Octo is our first DIN-RAIL pixel controller with 8 universes which can drive up to 1360 pixels. Allows Direct and Standalone modes, and controls 4U per output, making your experience as user flawless. With an easy-to use Web interface, create and edit up to 100 different presets from the virtual faders.

$400.00

Pixel Port: network rgb pixel driver

From $450.00

Pixel Triton

High Power LED Pixel driver

This revolutionary High Power LED Pixel driver is designed to be versatile, compact and powerful for any large installation. This Pixel driver is capable of outputting 8U and features a power consumption load sensor, virtual faders on the easy-to-use web interface, and can drive 4 universes without power injection.

$515.00

Pixelator Mini PX1-8D

Compact and powerful DIN-RAIL Ethernet to Pixel Link Driver that can drive up to 8192 channels (2,730 RGB Pixels).

$700.00

PSAT: pixel power supply

From $250.00

Pixel Link system

The smart way to connect your pixels to ENTTEC controllers.

From $30.00

Pixie Driver

Smart Pixel Tape Driver – drives upto 600 leds

From $220.00

Pixelator Mini

An 8-port Ethernet-pixel controller, a compact version of the Pixelator. Powerful enough to control up to 8,192 channels (2,730 RGB pixels) with perfect synchronisation across all eight of its outputs.

$800.00

Pixelator

Ethernet to Pixel Link Driver – control up to 24,576 LED channels (8,192 RGB pixels).

$2,100.00

ENTTEC LED MAPPER (ELM)

The ultimate, intuitive LED pixel mapping software solution. ENTTEC’s ELM is the easiest and smartest way to convert your ideas into reality.

From $125.00

Software

NMU

NMU is a free Windows/Mac app, used to manage compatible ENTTEC DMX over Ethernet nodes.

D-PRO

Multi-Universe, intuitive control software – easy to learn and packed with everything the advanced user needs.

From $200.00

ENTTEC LED MAPPER (ELM)

The ultimate, intuitive LED pixel mapping software solution. ENTTEC’s ELM is the easiest and smartest way to convert your ideas into reality.

From $125.00

DMXIS

Single universe (512ch) control software for Mac,PC, VST and Audio unit. Midi enabled, includes USB/DMX interface module.

$307.00

PRO-Manager

Web App to configure, test and troubleshoot ENTTEC DMX USB Devices. Record to PRO Mk2

USB

Limited Edition 20th Anniversary DMX USB Pro

To celebrate our 20th anniversary, we’ve created an extra special version of our groundbreaking DMX USB PRO – exclusive to enttec.com.

$170.00

DMX USB PRO Mk2

Next generation of DMX/USB interfaces with 2-universe (1024ch) standalone mode and MIDI interface, all-in-one convenient and slim interface.

$220.00

DMX USB Pro

Industry standard USB 2.0 Interface for DMX/RDM. Control your lights from PC or Mac programs

$170.00

DMXIS

Single universe (512ch) control software for Mac,PC, VST and Audio unit. Midi enabled, includes USB/DMX interface module.

$307.00

Open DMX USB

Lowest cost USB interface with minimal features

$70.00

USB Assembled Widget

Lowest cost basic USB interface with minimal features

$50.00

LED Drivers

DIN-LED4PX

The DIN-LED4PX is a 4 channel constant voltage LED driver with …

$110.00

Pixel Control

Pixel Octo

DIN-RAIL LED pixel controller

$400.00

Pixelator Mini PX1-8D

Compact and powerful DIN-RAIL Ethernet to Pixel Link Driver that can drive up to 8192 channels (2,730 RGB Pixels).

$700.00

CV Tape Drivers

IP66 CVC3 CC1-36

$220.00

CV MK2 – LED Tape Driver

Constant Voltage LED Tape Driver & Power supply in one

$440.00

DIN-LED4PX

The DIN-LED4PX is a 4 channel constant voltage LED driver with …

$110.00

Pixel Tape Drivers

Pixel Octo

DIN-RAIL LED pixel controller

$400.00

Pixel Port: network rgb pixel driver

From $450.00

Pixel Triton

High Power LED Pixel driver

$515.00

Pixelator Mini PX1-8D

Compact and powerful DIN-RAIL Ethernet to Pixel Link Driver that can drive up to 8192 channels (2,730 RGB Pixels).

$700.00

Pixie Driver

Smart Pixel Tape Driver – drives upto 600 leds

From $220.00

Pixelator Mini

$800.00

Pixelator

Ethernet to Pixel Link Driver – control up to 24,576 LED channels (8,192 RGB pixels).

$2,100.00

CV Strip

RGBW LED tape (10m)

The RGBW LED strip provides ultimate RGBW output and is designed and produced to the highest ENTTEC quality standards.

$270.00

RGB LED tape (10m)

$250.00

9CH high output LED tape (10m)

Extrusions

8EP aluminium extrusion

For universal use. A high-output strip with a small footprint designed for surface applications.

$35.00

8EA aluminium extrusion

For universal use. Designed for surface mount applications, with an opal diffuser.

$35.00

8EB aluminium extrusion

For mounting into grooves. Designed for recessed applications, with a lip for concealing plaster or timber edges.

$35.00

8EC aluminium extrusion

For building individual light fixtures. Designed for freestanding applications.

$35.00

8ED aluminium extrusion

For special applications. Designed for corner applications and situations where an angled beam is required.

$35.00

8EG aluminium extrusion

For mounting into grooves. Ultra-low profile strip designed for embedded applications.

$35.00

8ES aluminium extrusion

For maximum brightness. An extra-wide, high-output strip designed for surface applications.

$35.00

8EU aluminium extrusion

For high brightness. A powerful strip designed for surface applications.

$35.00

8EV aluminium extrusion

For universal use. A high-output strip with a small footprint designed for surface applications.

$35.00

8EW aluminium extrusion

For universal use. Our widest high-output strip designed for surface applications.

$35.00

8EX aluminium extrusion

For universal use. Our widest high-output strip designed for recessed applications.

$35.00

9EA aluminium extrusion

For use on staircases. A specialist extrusion for creating a spectacular effect.

$35.00

9EB aluminium extrusion

For illuminating walls. A specialist extrusion designed for wall wash effects.

$35.00

9EC aluminium extrusion

For universal use. A smart extrusion designed for surface applications.

$35.00

Pixel Strip

8PX60-12-B (12V) – 5M

Available for the very first time: the 12V strip with 60 individually-controllable single pixel RGB LEDs per meter, in a black PCB. Comes in a 5m roll.

$210.00

Black pixel tape RGB 8P60 (5V) 5m

$180.50

Black pixel tape RGBW (12V) – 5M

The best way to minimise external light reflection and conceal the workings of your installation when the display is switched off. It’s the stuff that a stealth designer’s dreams are made of.

$200.00

Black pixel tape RGBW 60 (5V) 4m

$180.50

Pixel tape RGB: 8PL60 (12V)

$185.00

Pixel tape RGB: 8PL144 (5V) 2m

$275.50

Pixel tape RGB: 8PL60 (5V) 5m

$180.50

Pixel tape RGB: 8PL30 (5V) 5m

$138.00

Pixel tape RGBW: 8PX60 (5V) 4m

$180.50

Pixel tape RGBW: 8PX30 (5V) 5m

$165.00

Pixel tape WWA 8PW60 (5V) 5m

$216.50

Pixel tape WWA 8PW30 (5V) 5m

$165.00

CV Tape

RGBW LED tape (10m)

The RGBW LED strip provides ultimate RGBW output and is designed and produced to the highest ENTTEC quality standards.

$270.00

RGB LED tape (10m)

$250.00

9CH high output LED tape (10m)

Pixel Dots

SMART PXL 40 DOT

Robust and reliable, ENTTEC’s hi-res, individually-addressable SMART PXL LED dots are designed and made in Australia from marine grade aluminium to withstand the harshest of environments.

P-DOT 135

Large RGWB Pixel Dot The auto-addressing P-DOT 135 dot has been designed to withstand tough environments with a robust IP66 housing while keeping a smooth 16-bit dimming and an incredible high brightness.

Pixel Strips

8PX60-12-B (12V) – 5M

Available for the very first time: the 12V strip with 60 individually-controllable single pixel RGB LEDs per meter, in a black PCB. Comes in a 5m roll.

$210.00

Black pixel tape RGB 8P60 (5V) 5m

$180.50

Black pixel tape RGBW (12V) – 5M

The best way to minimise external light reflection and conceal the workings of your installation when the display is switched off. It’s the stuff that a stealth designer’s dreams are made of.

$200.00

Black pixel tape RGBW 60 (5V) 4m

$180.50

Pixel tape RGB: 8PL60 (12V)

$185.00

Pixel tape RGB: 8PL144 (5V) 2m

$275.50

Pixel tape RGB: 8PL60 (5V) 5m

$180.50

Pixel tape RGB: 8PL30 (5V) 5m

$138.00

Pixel tape RGBW: 8PX60 (5V) 4m

$180.50

Pixel tape RGBW: 8PX30 (5V) 5m

$165.00

Pixel tape WWA 8PW60 (5V) 5m

$216.50

Pixel tape WWA 8PW30 (5V) 5m

$165.00

DMX Conversion

ODE MK2

Powerful Ethernet to DMX, single port solution that supports Art-Net, sACN or ESP and is RDM compatible

$275.00

Datagate MK2

$1,930.00

Storm 24

Need a high density Ethernet-DMX converter for your next pixel mapping project?

$1,560.00

Storm 8

8 Ports, Multi-protocol Ethernet to DMX converter

$599.00

Ethergate MK3

Dual Universe, Multi-protocol Ethernet to DMX Gateway

$550.00

Network Switches

Hyperion: EtherCON network switch

A touring-grade EtherCON network switch designed for life on the road, handling unicast, multicast and broadcast packets with an elegant and intuitive setup.

From $999.00

Pixel Control

IP66 Plink Injector PJ1-56

Compact Ethernet to Pixel Link driver – up to 2720 pixels

$220.00

Pixel Port: network rgb pixel driver

From $450.00

Pixelator Mini PX1-8D

Compact and powerful DIN-RAIL Ethernet to Pixel Link Driver that can drive up to 8192 channels (2,730 RGB Pixels).

$700.00

PSAT: pixel power supply

From $250.00

Pixel Link system

The smart way to connect your pixels to ENTTEC controllers.

From $30.00

Pixelator

Ethernet to Pixel Link Driver – control up to 24,576 LED channels (8,192 RGB pixels).

$2,100.00

Splitters

Storm 24

Need a high density Ethernet-DMX converter for your next pixel mapping project?

$1,560.00

Storm 8

8 Ports, Multi-protocol Ethernet to DMX converter

$599.00

Ethergate MK3

Dual Universe, Multi-protocol Ethernet to DMX Gateway

$550.00

D-Split (5 PIN)

DMX 4 way splitter. All ports optically isolated. DMX outputs: 4x 5 pin ouputs

$140.00

D-Split

DMX 4-way isolated optical splitter with two 5-pin and two 3-pin outputs

$140.00

RDS4

DMX/RDM 4 way opto-isolated splitter. Truss-mountable for professional networked systems. Extend your network and protect your equipment

$440.00

RDS8

DMX/RDM 8-way opto-isolated splitter. Rack-mountable for professional system operations. Extend your network and protect your equipment.

$775.00

Pixel Accessories

Pixel BreakOut Cable

Our professional quality Pixel BreakOut Cable is the fastest and easiest way to connect your Pixel Port or PSAT to your pixel strips or dots.

$16.00

PowerCon jumper 2m

A high quality 2 meters long powerCON jumper cable.

PowerCon jumper 950mm

A high quality 950mm long powerCON jumper cable.

powerCON mains cable (US)

A high quality 1.7 metre long powerCON mains power cable with US plug.

$20.00

Universal bracket set

A high quality carbon steel mounting bracket set to suit many mounting options

$52.00

Pixel Control

IP66 Plink Injector PJ1-56

Compact Ethernet to Pixel Link driver – up to 2720 pixels

$220.00

Pixel Octo

DIN-RAIL LED pixel controller

$400.00

Pixel Port: network rgb pixel driver

From $450.00

Pixel Triton

High Power LED Pixel driver

$515.00

Pixelator Mini PX1-8D

Compact and powerful DIN-RAIL Ethernet to Pixel Link Driver that can drive up to 8192 channels (2,730 RGB Pixels).

$700.00

PSAT: pixel power supply

From $250.00

Pixel Link system

The smart way to connect your pixels to ENTTEC controllers.

From $30.00

Pixie Driver

Smart Pixel Tape Driver – drives upto 600 leds

From $220.00

Pixelator Mini

$800.00

Pixelator

Ethernet to Pixel Link Driver – control up to 24,576 LED channels (8,192 RGB pixels).

$2,100.00

Pixel Dots

SMART PXL 40 DOT

Robust and reliable, ENTTEC’s hi-res, individually-addressable SMART PXL LED dots are designed and made in Australia from marine grade aluminium to withstand the harshest of environments.

P-DOT 135

Pixel Strip

8PX60-12-B (12V) – 5M

Available for the very first time: the 12V strip with 60 individually-controllable single pixel RGB LEDs per meter, in a black PCB. Comes in a 5m roll.

$210.00

Black pixel tape RGB 8P60 (5V) 5m

$180.50

Black pixel tape RGBW (12V) – 5M

The best way to minimise external light reflection and conceal the workings of your installation when the display is switched off. It’s the stuff that a stealth designer’s dreams are made of.

$200.00

Black pixel tape RGBW 60 (5V) 4m

$180.50

Pixel tape RGB: 8PL60 (12V)

$185.00

Pixel tape RGB: 8PL144 (5V) 2m

$275.50

Pixel tape RGB: 8PL60 (5V) 5m

$180.50

Pixel tape RGB: 8PL30 (5V) 5m

$138.00

Pixel tape RGBW: 8PX60 (5V) 4m

$180.50

Pixel tape RGBW: 8PX30 (5V) 5m

$165.00

Pixel tape WWA 8PW60 (5V) 5m

$216.50

Pixel tape WWA 8PW30 (5V) 5m

$165.00

Show Recorders

S-PLAY

Engineered for projects that require precise automation, the S-PLAY is your all-in-one solution for the recording, triggering and activation of not only light shows but much, much more.

$700.00

DMXStreamer

Ultimate DMX-512 recording device with front panel programming and inbuilt time clock for preset show playback.

$830.00

Art-Net

Pixel Port: network rgb pixel driver

From $450.00

Pixel Triton

High Power LED Pixel driver

$515.00

ODE MK2

Powerful Ethernet to DMX, single port solution that supports Art-Net, sACN or ESP and is RDM compatible

$275.00

ODE POE MK2

Solid-state single universe RDM compatible DMX node featuring PoE (802.3af)

$330.00

Datagate MK2

$1,930.00

Storm 24

Need a high density Ethernet-DMX converter for your next pixel mapping project?

$1,560.00

Storm 8

8 Ports, Multi-protocol Ethernet to DMX converter

$599.00

Ethergate MK3

Dual Universe, Multi-protocol Ethernet to DMX Gateway

$550.00

NMU

NMU is a free Windows/Mac app, used to manage compatible ENTTEC DMX over Ethernet nodes.

DIN-ODE POE Mk2

DIN-Rail DMX-Artnet node in PoE form providing 1 universe of bi-directional DMX to Ethernet conversion

$320.00

DIN-ODE Mk2

DIN RAIL DMX-Artnet node that provides 1 universe of bi-directional DMX to Ethernet conversion, perfect for distributing DMX signals over a network.

$275.00

Pixelator Mini

$800.00

Pixelator

Ethernet to Pixel Link Driver – control up to 24,576 LED channels (8,192 RGB pixels).

$2,100.00

DMX

Limited Edition 20th Anniversary DMX USB Pro

To celebrate our 20th anniversary, we’ve created an extra special version of our groundbreaking DMX USB PRO – exclusive to enttec.com.

$170.00

ODE MK2

Powerful Ethernet to DMX, single port solution that supports Art-Net, sACN or ESP and is RDM compatible

$275.00

ODE POE MK2

Solid-state single universe RDM compatible DMX node featuring PoE (802.3af)

$330.00

Datagate MK2

$1,930.00

Storm 24

Need a high density Ethernet-DMX converter for your next pixel mapping project?

$1,560.00

Storm 8

8 Ports, Multi-protocol Ethernet to DMX converter

$599.00

D-Split (5 PIN)

DMX 4 way splitter. All ports optically isolated. DMX outputs: 4x 5 pin ouputs

$140.00

D-Split

DMX 4-way isolated optical splitter with two 5-pin and two 3-pin outputs

$140.00

RDS4

DMX/RDM 4 way opto-isolated splitter. Truss-mountable for professional networked systems. Extend your network and protect your equipment

$440.00

DMX USB PRO Mk2

Next generation of DMX/USB interfaces with 2-universe (1024ch) standalone mode and MIDI interface, all-in-one convenient and slim interface.

$220.00

DMX USB Pro

Industry standard USB 2.0 Interface for DMX/RDM. Control your lights from PC or Mac programs

$170.00

Open DMX USB

Lowest cost USB interface with minimal features

$70.00

USB Assembled Widget

Lowest cost basic USB interface with minimal features

$50.00

Kling-Net

Pixelator Mini PX1-8D

Compact and powerful DIN-RAIL Ethernet to Pixel Link Driver that can drive up to 8192 channels (2,730 RGB Pixels).

$700.00

Pixelator Mini

$800.00

Pixelator

Ethernet to Pixel Link Driver – control up to 24,576 LED channels (8,192 RGB pixels).

$2,100.00

RDM

Limited Edition 20th Anniversary DMX USB Pro

To celebrate our 20th anniversary, we’ve created an extra special version of our groundbreaking DMX USB PRO – exclusive to enttec.com.

$170.00

RDM license key

Unlock ENTTEC’s full RDM software package, to be used in conjunction with our DMX interfaces

$390.00

ODE MK2

Powerful Ethernet to DMX, single port solution that supports Art-Net, sACN or ESP and is RDM compatible

$275.00

ODE POE MK2

Solid-state single universe RDM compatible DMX node featuring PoE (802.3af)

$330.00

Datagate MK2

$1,930.00

DIN-ODE POE Mk2

DIN-Rail DMX-Artnet node in PoE form providing 1 universe of bi-directional DMX to Ethernet conversion

$320.00

DIN-ODE Mk2

DIN RAIL DMX-Artnet node that provides 1 universe of bi-directional DMX to Ethernet conversion, perfect for distributing DMX signals over a network.

$275.00

RDM Kit

The ENTTEC RDM Kit gives you the power to make use of all RDM features available.

$690.00

RDM Controller

The RDM controller is an application designed to control RDM fixtures

RDM Sniffer

Sniffer software is used to monitor your DMX/RDM network. Designed for developer and users needing unprecedented in-depth look into the DMX/RDM network

RDM Responder

The RDM Library is used by developers need to add RDM support to their software applications.

RDM Library

The RDM Library is used by developers need to add RDM support to their software applications.

RDS4

DMX/RDM 4 way opto-isolated splitter. Truss-mountable for professional networked systems. Extend your network and protect your equipment

$440.00

RDS8

DMX/RDM 8-way opto-isolated splitter. Rack-mountable for professional system operations. Extend your network and protect your equipment.

$775.00

DMX USB PRO Mk2

Next generation of DMX/USB interfaces with 2-universe (1024ch) standalone mode and MIDI interface, all-in-one convenient and slim interface.

$220.00

DMX USB Pro

Industry standard USB 2.0 Interface for DMX/RDM. Control your lights from PC or Mac programs

$170.00

sACN

Pixel Port: network rgb pixel driver

From $450.00

Pixel Triton

High Power LED Pixel driver

$515.00

ODE MK2

Powerful Ethernet to DMX, single port solution that supports Art-Net, sACN or ESP and is RDM compatible

$275.00

ODE POE MK2

Solid-state single universe RDM compatible DMX node featuring PoE (802.3af)

$330.00

Datagate MK2

$1,930.00

Storm 24

Need a high density Ethernet-DMX converter for your next pixel mapping project?

$1,560.00

Storm 8

8 Ports, Multi-protocol Ethernet to DMX converter

$599.00

Ethergate MK3

Dual Universe, Multi-protocol Ethernet to DMX Gateway

$550.00

DIN-ODE POE Mk2

DIN-Rail DMX-Artnet node in PoE form providing 1 universe of bi-directional DMX to Ethernet conversion

$320.00

DIN-ODE Mk2

DIN RAIL DMX-Artnet node that provides 1 universe of bi-directional DMX to Ethernet conversion, perfect for distributing DMX signals over a network.

$275.00

Pixelator Mini

$800.00

Pixelator

Ethernet to Pixel Link Driver – control up to 24,576 LED channels (8,192 RGB pixels).

$2,100.00

ENTTEC LED MAPPER (ELM)

The ultimate, intuitive LED pixel mapping software solution. ENTTEC’s ELM is the easiest and smartest way to convert your ideas into reality.

From $125.00

USB

Limited Edition 20th Anniversary DMX USB Pro

To celebrate our 20th anniversary, we’ve created an extra special version of our groundbreaking DMX USB PRO – exclusive to enttec.com.

$170.00

Pixie Driver

Smart Pixel Tape Driver – drives upto 600 leds

From $220.00

DMX USB PRO Mk2

Next generation of DMX/USB interfaces with 2-universe (1024ch) standalone mode and MIDI interface, all-in-one convenient and slim interface.

$220.00

DMX USB Pro

Industry standard USB 2.0 Interface for DMX/RDM. Control your lights from PC or Mac programs

$170.00

Open DMX USB

Lowest cost USB interface with minimal features

$70.00

USB Assembled Widget

Lowest cost basic USB interface with minimal features

$50.00

Hardware

Limited Edition 20th Anniversary DMX USB Pro

To celebrate our 20th anniversary, we’ve created an extra special version of our groundbreaking DMX USB PRO – exclusive to enttec.com.

$170.00

ODE MK2

Powerful Ethernet to DMX, single port solution that supports Art-Net, sACN or ESP and is RDM compatible

$275.00

ODE POE MK2

Solid-state single universe RDM compatible DMX node featuring PoE (802.3af)

$330.00

Datagate MK2

$1,930.00

DIN-ODE POE Mk2

DIN-Rail DMX-Artnet node in PoE form providing 1 universe of bi-directional DMX to Ethernet conversion

$320.00

DIN-ODE Mk2

DIN RAIL DMX-Artnet node that provides 1 universe of bi-directional DMX to Ethernet conversion, perfect for distributing DMX signals over a network.

$275.00

RDM Kit

The ENTTEC RDM Kit gives you the power to make use of all RDM features available.

$690.00

RDS4

DMX/RDM 4 way opto-isolated splitter. Truss-mountable for professional networked systems. Extend your network and protect your equipment

$440.00

RDS8

DMX/RDM 8-way opto-isolated splitter. Rack-mountable for professional system operations. Extend your network and protect your equipment.

$775.00

DMX USB PRO Mk2

Next generation of DMX/USB interfaces with 2-universe (1024ch) standalone mode and MIDI interface, all-in-one convenient and slim interface.

$220.00

DMX USB Pro

Industry standard USB 2.0 Interface for DMX/RDM. Control your lights from PC or Mac programs

$170.00

Software

RDM license key

Unlock ENTTEC’s full RDM software package, to be used in conjunction with our DMX interfaces

$390.00

RDM Controller

The RDM controller is an application designed to control RDM fixtures

RDM Sniffer

Sniffer software is used to monitor your DMX/RDM network. Designed for developer and users needing unprecedented in-depth look into the DMX/RDM network

RDM Responder

The RDM Library is used by developers need to add RDM support to their software applications.

RDM Library

The RDM Library is used by developers need to add RDM support to their software applications.

Hardware Licenses

RDM license key

Unlock ENTTEC’s full RDM software package, to be used in conjunction with our DMX interfaces

$390.00

Lighting Control

D-PRO

Multi-Universe, intuitive control software – easy to learn and packed with everything the advanced user needs.

From $200.00

ENTTEC LED MAPPER (ELM)

The ultimate, intuitive LED pixel mapping software solution. ENTTEC’s ELM is the easiest and smartest way to convert your ideas into reality.

From $125.00

DMXIS

Single universe (512ch) control software for Mac,PC, VST and Audio unit. Midi enabled, includes USB/DMX interface module.

$307.00