DIN Ethergate Mk2

With 2U bi-directional Ethernet to DMX conversion with Art-RDM, or up to 16U Overdrive Mode (500K/750K/1000K, compatible fixtures only), PoE or flexible 12-24v DC input, the DIN Ethergate Mk2 allows for fast deployment of DMX systems and is compatible with a wide range of devices.

SKU: 71031

Overview
Features
Connectivity
Specifications
Resources

Next-generation Ethernet to DMX/RDM gateway

The DIN Ethergate Mk2 is a reliable DMX node designed for architectural, commercial, or entertainment projects. It supports 2 Universes of bi-directional DMX to DMX512-A conversion with ArtRDM support, and Overdrive Mode enables control of up to 4,096 channels per port at higher transmission speeds of 500K, 750K or 1000K (works only with Overdrive-compatible fixtures). Dual Ethernet ports, one with PoE, allow easy daisy-chaining, while configuration and firmware updates are managed via a localhost web interface. Its slim, 4 DIN-module housing offers flexible mounting options and user-friendly wiring with pluggable terminal blocks.

The configuration is managed through the localhost web interface to simplify commissioning and updates as well as to allow the DIN Ethergate Mk2 to be configured from any computer on your network.

All ENTTEC Ethernet hardware accepts sACN Sync as well as ArtSync to fully synchronize Art-Net data for all output ports and across your installation when receiving Art-Net from the same source.

Power the DIN Ethergate using IEEE 802.3af PoE (Power over Ethernet) or DC 12-24v input. NOTE: when daisy-chained in series, only the first device will receive PoE. Subsequent devices require PoE injector individually to be powered via an Ethernet port.

Featuring a 4-DIN-module electrically-insulated housing, the DIN Ethergate MK2’s slim form includes a DIN-rail clip enabling attachment to a TS35 DIN-rail alongside the option to wall mount the device in any orientation.

Our Ethernet to DMX converter is packed with installer-friendly features including pluggable terminal connectors and inbuilt DMX termination to simplify wiring. Also, a ‘Current Port Buffer’ within the web interface allows live DMX values to be viewed from the web interface to troubleshoot your installation. Upon receiving power, the device is ready to go within seconds.

Output data at higher transmission rates, with selectable speeds of 500K (default), 750K and 1000K, to control up to 8 Universes per port for Overdrive-compatible fixtures. IMPORTANT: DMX500K, DMX750K and DMX1000K are incompatible with standard DMX512-A fixtures and does not conform to ANSI E1.11 – 2024. Do not use Overdrive Mode with unsupported fixtures. ENTTEC’s DMX Neon Flex is a compatible fixture supporting Overdrive Mode.

ENTTEC are proud to back up the confidence in our research, engineering and quality control with a 3-year manufacture defect warranty on this product.

Learn how to connect your DIN Ethergate to a LED strip

PLEASE NOTE: This demonstration features the Mk1 version of the DIN Ethergate, but the basic principles remain the same for the Mk2. Don’t hesitate to get in touch with us if you have any questions – we’re always happy to help!

Specifications

Connectors	2* LAN port (RJ45) 2* Bi-directional DMX (4Pin Phoenix) 1* Power Input (2Pin Phoenix)
IP Rating	IP20
LED Indicators	Forward facing status indicator Network link/activity indicators (RJ45 Port)
Input – eDMX Protocols	Art-Net (RDM) KiNet sACN ESP
Output – DMX Protocols	DMX512-A/RDM (250 Kbps) DMX500K (500 Kbps) DMX750K (750 Kbps) DMX1000K (1000 Kbps)
DMX & RDM Timings	Break time 300ms Mark after Break (MAB) 15ms
Art-Net Merging	2 Sources
Max. Channels	DMX512-A: 1,024ch (2U) DMX Overdrive (500K/750K/1000K): 4,096ch (8U)
Max. Refresh rate	44FPS (1, 2, 4 Universes) 22FPS (at 8 Universes)
Network Speed	10/100Base-T
Power over Ethernet	IEEE 802.3af
Network configuration	DHCP/Static (default 192.168.0.10)
IGMP Version	IGMPv2
Firmware updates	Through web interface
DC input voltage	12-24V DC
Max. power draw	7W
Max. heat dissipation	7W
Operating temperature	0°C to 50°C 32°F to 122°F
Operating humidity	5- 95% (non-condensing)
Body material	ABS plastic
Mounting options	Surface mount TS35 DIN-Rail mount
Unit dimensions	100.5mm * 72.25mm * 34mm
Unit weight	0.11kg / 0.24lbs
Shipping dimensions	140mm * 140mm * 40mm
Shipping weight	0.16kg / 0.35lbs
Warranty	3-year return to base manufacturer warranty

Projects Featuring the DIN Ethergate Mk2

See All Projects

Daewangam Park Footbridge
Castle Coch
House of Hype
Dubai CommerCity

Get in Touch

Enquire about the DIN Ethergate Mk2

Explore the DIN Ethergate Mk2: Connect with our team to discuss your project needs and let us tailor a solution for you with pricing in 24-48 hours. Contact an expert now or subscribe to our newsletter for the latest updates and insights.

Find out more