legacy Archives

ET3-D Indoor LED Bar

An indoor light bar for club, concert or architectural applications. The combination of RGB, amber and whites produce a mixture of deep colour or bright beautiful pastels.

ET3-R Outdoor LED Bar

All-weather and all-rounder Outdoor LED Bar. IP65 rated and built for life on the road, this light Bar is perfect for exterior use and any kind of applications.

ET3-X Indoor LED Bar

With sheer engineering brilliance, the ET3-X produces a rich colour palette with unrivalled gamut and rendition.

Gigabit Fibre Optic SFP module

Connect your Hyperion to fiber networks and transmit long distances at Gigabit speed with this awesome SFP module.

Hyperion: EtherCON network switch

A touring-grade EtherCON network switch designed for life on the road, handling unicast, multicast and broadcast packets with an elegant and intuitive setup.

Pixel Port: network rgb pixel driver

Intelligent, all in one, touring Pixel LED Controller. COmpact and built to last, simply connect it to your pixel and your network. One driver can power up and drive up to 340 RGB pixels. This unit supports DMX over Ethernet and other output protocols. Perfect for touring, it comes with etherCON and powerCON connectors. The perfect portal for easy lighting control.

Pixel Port: network rgb pixel driver legacy

Intelligent, all in one, touring Pixel LED Controller. COmpact and built to last, simply connect it to your pixel and your network. One driver can power up and drive up to 340 RGB pixels. This unit supports DMX over Ethernet and other output protocols. Perfect for touring, it comes with etherCON and powerCON connectors. The perfect portal for easy lighting control.

Pixel Triton

High Power LED Pixel driver

This revolutionary High Power LED Pixel driver is designed to be versatile, compact and powerful for any large installation. This Pixel driver is capable of outputting 8U and features a power consumption load sensor, virtual faders on the easy-to-use web interface, and can drive 4 universes without power injection.

PowerCon jumper 2m

A high quality 2 meters long powerCON jumper cable.

PowerCon jumper 5m

A high quality 5 metres long powerCON jumper cable.

PowerCon jumper 950mm

A high quality 950mm long powerCON jumper cable.

powerCON mains cable (US)

A high quality 1.7 metre long powerCON mains power cable with US plug.

PSAT: pixel power supply

With our new Pixel power supply device, you can easily power up and inject data to pixel strip and dot, without the need of an external power supply. Connect your lights using a connector and a driver (such as the Pixelator). Perfectly suited for both the live event and installation markets.

PSAT: pixel power supply legacy

With our new Pixel power supply device, you can easily power up and inject data to pixel strip and dot, without the need of an external power supply. Connect your lights using a connector and a driver (such as the Pixelator). Perfectly suited for both the live event and installation markets.

Universal bracket set

A high quality carbon steel mounting bracket set to suit many mounting options

Remote control cable E-Streamer Mk2

Control your E-Streamer Mk2 with DMXPlayback Remote

9PDOT1 Clips (bag of 10)

Mounting Clips to suit 9PDOT1

9PDOT2 Clips (bag of 10)

Mounting Clips to suit 9PDOT2

9PDOT3 Clips (bag of 10)

Mounting Clips to suit 9PDOT3

9PDOT4 Clips (bag of 10)

Mounting Clips to suit 9PDOT4

9PDOT5 Clips (bag of 10)

Mounting Clips to suit 9PDOT5

9PDOT6 Clips (bag of 10)

Mounting Clips to suit 9PDOT6

9PDOT7 Clips (bag of 10)

Mounting Clips to suit 9PDOT7

9PDOT8 Clips (bag of 10)

Mounting Clips to suit 9PDOT8

RDM license key

Unlock ENTTEC’s full RDM software package, to be used in conjunction with our DMX interfaces

0.5m 5Pin DMX Cable

This short DMX jumper cable is perfect for connecting your DMX fixtures to controllers.

2M 5Pin DMX Cable M-F

This DMX cable is perfect for connecting your dmx fixtures to ENTTEC and other DMX devices.

5M 5Pin DMX Cable M-F

This DMX cable is perfect for connecting your ENTTEC DMX device to any DMX fixture.

PHERO 30 RGB pixel bar

The Phero 30 allows unparalleled flexibility and amazing light output. Ideal for pixel mapping and universal lighting applications.

PHERO 33 RGB pixel bar

Phero 33 is for direct lighting applications. Its slim form factor makes it an ideal touring partner, with 3 diffuser options to choose from.

PHERO 30 WHITE bar

The classic Phero 30 design with amazing white light output instead of RGB. Designed for pixel mapping and universal lighting applications.

Pixel tape RGB: 8PL144 (5V) 2m

ODE with POE

Standard simple single port Ethernet to DMX gateway. 7V Supply or POE(Power over Ethernet) option

ODE

Standard simple single port Ethernet to DMX gateway. 7V Supply or POE(Power over Ethernet) option

DIN-RS232

The DIN-RS232 is an RS232 to DIN-NET interface device. It can send RS232 strings when a particular DIN-NET action is …

DIN-RELAY 4

DIN-INPUT 8

The DIN-INPUT 8 is an 8 dry contact input to a din-net device. It can detect a close or open …

9CU ultra high output LED tape (10m)

9CM medium output LED tape (10m)

9CL low power LED tape (10m)

9PDOT1 (string of 50)

High resolution IP67 35mm clear RGB 24V pixel dots with 125mm pitch.

9PDOT2 (string of 50)

High resolution IP67 40mm clear RGB 24V pixel dots with 125mm pitch.

9PDOT3 (string of 50)

High resolution IP67 44mm opal dome RGB 24V pixel dots with 125mm pitch.

9PDOT4 (string of 50)

High resolution IP67 42mm square RGB 24V pixel dots with 125mm pitch.

9PDOT5 (string of 50)

High resolution IP67 25mm clear RGB 12V pixel dots with 100mm pitch.

9PDOT6 (string of 50)

High resolution IP67 16mm clear square RGB 5V pixel dots with 100mm pitch.

9PDOT7 (string of 50)

High resolution IP67 16mm clear square white RGB 5V pixel dots with 100mm pitch.

9PDOT8 (string of 50)

High resolution IP67 16mm opal dome square white RGB 5V pixel dots with 100mm pitch.

Black 9PDOT Cable (female)

Loose connector cable to suit black 9PDOTs (female connector)

Black 9PDOT Cable (male)

Loose connector cable to suit white 9PDOTs (Male connector)

White 9PDOT Cable (female)

Loose connector cable to suit white 9PDOTs (female connector)

White 9PDOT Cable (male)

Loose connector cable to suit white 9PDOTs (Male connector)

PRO2 Wall Mount Kit

Pro2 Wall Mount plate This accesory allows mounting of the USB Pro2 interface onto a permanent surface. Ideal …

5W USB Power Supply

16cm 5Pin DMX Cable M-F

This short DMX jumper cable is perfect for connecting your DMX fixtures to other DMX controller.

RDS4 Truss mount kit

Truss mount kit, specially engineered and crafted to fit RSD4.

10M 5Pin DMX Cable M-F

This DMX cable is perfect for connecting your ENTTEC DMX Device to any DMX fixture.

Heatsink for Pixel tile

Protect your 144-LED pixel tile from overheating. Simply snap on, and you’re away!

8 way pixie driver rack

Wing Rackmount Kit

The Wing rackmount bracket will allow you to rack your wings in a standard 19inch enclosure, punched with 2 extra holes

USB to RS232 Cable

Connect DMXPlayback or DMXStreamer to your PC using USB.

Pixel tape WWA 8PW60 (5V) 5m

Pixel tape WWA 8PW30 (5V) 5m

DIN-LED4PX

The DIN-LED4PX is a 4 channel constant voltage LED driver with …

DMX Wall plate Controller

Programmable multi-function DMX controller

DIN-LED4 350X

The DIN-LED4 350X is a 4 channel constant current 350mA LED driver with DMX/RDM input.

DIN-LED4 700X

The DIN-LED4 700X is a 4 channel constant current 700mA LED driver with DMX/RDM input. …

DIN-LED4 1000X

The DIN-LED4 100X is a 4 channel constant current 1000mA LED driver with DMX/RDM input.

Pixie Driver legacy

Smart Pixel Tape Driver – drives upto 600 leds

DIN-NET USB

It connects your existing DIN-NET to your computer via a USB cable, (supplied) and that allows the free DIN TOOL software …

DIN-POWER

The DIN-POWER is a power injector for the DIN-NET network. At least 1is needed for every din-net network. The din-power module …

Wireless DMX

Transmit and extend your existing DMX system without wires. One full DMX universe supported

RDM Kit

The ENTTEC RDM Kit gives you the power to make use of all RDM features available.

RDM Controller

The RDM controller is an application designed to control RDM fixtures

RDM Sniffer

Sniffer software is used to monitor your DMX/RDM network. Designed for developer and users needing unprecedented in-depth look into the DMX/RDM network

RDM Responder

The RDM Library is used by developers need to add RDM support to their software applications.

RDM Library

The RDM Library is used by developers need to add RDM support to their software applications.

RDS4

DMX/RDM 4 way opto-isolated splitter. Truss-mountable for professional networked systems. Extend your network and protect your equipment

E-Streamer Mk2

Advanced show recorder with up 64 universes of playback and scheduling

E-Streamer Licenses

Add multiple universes to your base E-Streamer unit

DMXPlayBack MK2

Simple playback unit with the capability of storing up to 12 light shows created from static scenes

DMXPlayBack Remote MK2

Add on to DMX Playback or DMX Streamer. DMX Playback Remote can start/stop up to 12 preset shows.

ENTTEC Program Wing

Designed for fast editing and creation of cues, palettes, groups etc. Includes 3 rotary encoders and large text display with dedicated numeric and program buttons.

ENTTEC Playback Wing

Designed to allow fast manual control of lighting control software

ENTTEC Shortcut Wing

Shortcut Wing, ideal as a lighting control add on. Multiple user defined keys can be set to trigger as a shortcut of supported lighting software.

ENTTEC MIDIwing

Conversion software designed to enable Enttec Playback, Shortcut or Program Wings to converse via MIDI or ASCII.