An indoor light bar for club, concert or architectural applications. The combination of RGB, amber and whites produce a mixture of deep colour or bright beautiful pastels.
The High Power LED Bar
Designed to be installed easily in any indoor scenario, the bright and powerful ET3-D is a true industry workhorse combining reliability and functionality within a robust convection cooled housing. With a vibrant RGBWA LED output and a choice of 25°, 40° or 60° beam angle, the ET3-D is well suited to a wide range of applications. This LED Bar is also available in either 300mm, 600mm and 1200mm configurations.
Available in 3 sizes
The ET3-D is available in 300mm, 600mm or 1200mm lengths.
Beam angle options
Choose between 25°, 40° and 60° beam angles.
Control and monitor
Easily control with full DMX-512 support using any DMX source. Monitor the temperature sensors, and configure the rest using RDM, thanks to E1.20 support.
Allows a selection of 6 possible DMX personalities. From 8-bit, 5 DMX channel modes to 16-bit, 12 DMX channel mode, each personality allows for the individual control of the unit’s finer features.
Choose from 16-bit or 8-bit LED dimming. Simply change the DMX personality and get a greater control on the dimming. Also available is a strobe mode with controllable frequency from DMX.
Best color output
The ET3-D has been laboratory-calibrated to closely follow the black body locus curve. With 8-bits resolution allowing the light to travel from true warm to cool whites (1800K to 12000K) keeping a high CRI for natural colours.
Built in control panel
Easily scroll through the settings: set DMX address or record and recall a snapshot or preset. All with the help of a LCD screen and buttons at the back of the unit.
Snap to a preset
Easily take a snapshot, with support for up to 64 fully user-recordable slots, in addition to 50 presets. The presets are pre-loaded with stand-alone colors to help you get started.
Powerful Ethernet to DMX, single port solution that supports Art-Net, sACN or ESP and is RDM compatible
ODE MK2$310.00 Read more
Compact and powerful 8-port, multi-protocol Ethernet to DMX converter
Storm 8$634.00 Buy Now
Next-generation of DMX/USB interfaces with 2-universe (1024ch) standalone mode and MIDI interface, all-in-one convenient and slim interface. Perfect for any space requiring up to 512 channels of reliable DMX playback.
DMX USB PRO Mk2$220.00 Buy Now
This DMX cable is perfect for connecting your ENTTEC DMX device to any DMX fixture.
5M 5Pin DMX Cable M-FRead more
This short DMX jumper cable is perfect for connecting your DMX fixtures to controllers.
0.5m 5Pin DMX CableRead more
With a 24 DMX output in an RJ45 form factor, the Storm 24 is installer-friendly, cost-effective, and most importantly, perfect for any LED pixel mapped project or large traditional lighting rig.
Storm 24 – Ethernet to DMX converter$1,560.00 Buy Now