With a groundbreaking $65 per port system cost, DMX conversion is no longer a high-cost item in your pixel mapping budget. RJ45 outputs also lower cabling costs by using standard crimp connectors instead of more expensive XLR connectors.
Using state of the art FPGA programmable Logic, ultra fast DDR memory and Gigabit ethernet, all 24 DMX outputs are synchronized within 100 micro seconds, when using Sync mode. No more image ghosting or jumpy updates of your content. No other device offers this level of performance.
Easier and lower cabling costs using standard RJ45 outputs. Although XLR connectors are widely used in the entertainment world, when your project isn’t travelling the world on a regular basis, RJ45s connectors offer the best price/performance ratio. Using standard shielded CAT5 cable to connect your whole system also helps keep the cost per port down. We use the standard ANSI E1.27-2 specified RJ45 pinout to make sure most equipment connections will be simple.
- Art-Net 1
- Art-Net 2
- Art-Net 3
- 24 DMX 512 output ports on RJ45
- 1 Gigabit Ethernet port
- Jumbo Frame support
- 1 RS232 input for profile selection via serial command. Note: RS232 is not supported by RevC devices produced after April 2020.
Recommended App: ELM
ELM : ENTTEC LED MAPPER provides total control over your LED system, regardless of shape and size. Design your layout with vector-based objects for maximum precision and flexibility.
Load the media of your choice and begin playback as needed. Supports Spout and NDI. Supports RGB, RGBW, RGBA, RGBAW/RGBWA and White fixtures
Compatible 3rd Party Apps
Over the lifecycle of this product, incremental improvements have been made to its hardware and core operating system to ensure it remains current. The functionality remains the same. There have been RevA, RevB & RevC versions of this product, each requiring its own version of firmware. To determine the version of firmware your device requires, navigate to its home page. If unsure, contact our technical support team with a screen grab of your device’s home page.
ENTTEC strongly recommends that you keep up to date with current Storm hardware with Rev.B firmware to avoid a situation where you need service or support that is no longer available.