ODE not establishing ethernet link

Problem:

The ODE can't establish an Ethernet link with my switch/hub/computer. The LINK led flashes on the ODE or switch.

Solution:

There is a manufacturing fault with some very early ODE units (2008) where 51K resistors was inserted instead of 51 Ohms
This creates a compatibility problem with between the ODE and some network devices.
Please email support@enttec.com with your serial number for a confirmation that you have an affected unit and to obtain an RMA

Here is a picture of the 4 resistors that need to be changed.

Keywords: ode ethernet

ESP & DMX over Ethernet Products