DIN-LED4PX
US $ 103.95





The DIN-LED4PX is a 4 channel constant voltage LED driver with DMX/RDM input.
  • Each channel can control up to 1A @ 24V (supplied by external power supply).
  • Dimming is performed with a 500Hz PWM signal, and 8 bit resolution.
  • There are 2 automode programs with adjustable speeds that cycle through colours when RGB leds are connected to the outputs.
  • DMX address or Automode is set using any standard RDM controller

Specifications:

  • 4 LED ports on 10 way screw connectors
  • 1 input DMX on 3 way screw connector
  • Status LED
  • Each channel has auto reset 1A over current protection
  • Standard 4 module wide din-rail enclosure
  • Operating 0 >50 ambient


Wiring
Downloads/Links
Copyright © 2016 ENTTEC, all rights reserved. Rowville, Melbourne, Australia